Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Sun Visor Light on a Volkswagen New Beetle

Model: Volkswagen New Beetle MK 2, 9C - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Interior dome light bulb

See other generations:
Video tutorial

Today you will learn how to change the bulb in the sun visor light. This is a fairly simple task; with a bit of effort and attention, you can complete it without any problems.

Get a tool to release the bulb holder (screwdriver, plastic spatula, etc.), apply pressure to the sides to release the bulb holder. Once done, you will have removed both the lens and the bulb holder in one go. Now, simply remove the old bulb and install the new one, then reinsert the bulb holder, and you will have finished the job.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

Volkswagen New Beetle (1999-2012 / MK 2, 9C) If you want to replace the front headlamp bulb on your Volkswagen Beetle Mk2 (1998-2012) yourself, simply follow the steps outlined below. First, par…
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In this video, you will see how to remove the front headlight bulb from the Volkswagen New Beetle up to the year 2011. First, open the bonnet of your…
Volkswagen New Beetle (2011-2018 / MK 3) To replace the front headlamp bulb on the Volkswagen New Beetle, open the bonnet to access the components inside the engine bay: at the back of the h…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Adjusting the Handbrake on a Kia Sportage

Today, learn how to adjust the handbrake on a Kia Sportage (2016-2022). Start by opening the armrest and removing the bottom with a small flat screwdriver as shown in the video. Next, remove the inner panel on the handbrake side to access its adjustment nut. Once done, use a spanner to turn the nut clockwise to increase the handbrake tension, or alternatively, loosen the tension by turning the nut anti-clockwise. After adjusting the cable tension, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos