Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Transporter

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

Today, we will go through the steps to reset the service light for the routine maintenance oil change on a Volkswagen Transporter. First, get into the cabin and press and hold the reset button located at the bottom right of the instrument cluster; then turn the ignition key to position one, waiting for the maintenance warning to appear on the display, as shown in the video.

At this point, confirm and perform the service reset by pressing the "ok" button on the steering wheel.


Posted on 1 September 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Transporter T6?
How to Reset the "Service" Light on a Volkswagen Transporter T6?
Volkswagen Transporter (2014-2025 / T6, MK 6) Good morning, today’s objective is to reset the "Service" light on your Volkswagen Transporter T6. Start by sitting in the driver’s seat. Then, by pr…
How to reset the "Service" light on a Volkswagen Transporter T5?
How to reset the "Service" light on a Volkswagen Transporter T5?
Volkswagen Transporter (2003-2014 / T5, MK 5) To reset the "Service" light on a Volkswagen Transporter T5, start by pressing and holding the button under the instrument panel. While holding the b…
How to reset the Service light on the Volkswagen Transporter?
How to reset the Service light on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) To reset the Service light on the Volkswagen Transporter, press and hold the 0.0 button located on the right side of the instrument cluster while it …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos