Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Front Headlamp on a Volkswagen Polo

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Headlight

This brief guide illustrates the procedure for removing and replacing the front headlamp on a Volkswagen Polo. First, open the bonnet of the vehicle and begin unscrewing all the fastening screws located at the top of the headlamp; then disconnect the electrical connector for the bulbs, gently unclip the headlamp from the bumper until it is completely detached and removed, as shown in the video. At this point, replace the bulbs or the entire headlamp unit, securing it properly to the bodywork and checking its operation!

Posted on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Volkswagen Polo?
How to Replace the Front Headlamp Bulb on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) To replace the front headlamp bulb on a Volkswagen Polo, open the bonnet to access the screws securing the headlamp from the top. Loosen these screws…
Replacing the Front Headlamp Bulb on the Volkswagen Polo
Replacing the Front Headlamp Bulb on the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) This guide will show you how to remove and replace the front headlamp bulb on the Volkswagen Polo in simple, quick steps. First, open the bonnet of t…
Removing the Bulbs from the Front Headlamp on a Volkswagen Polo
Removing the Bulbs from the Front Headlamp on a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Removing the bulbs from the front headlamp on a Volkswagen Polo? Follow these steps. Open the bonnet by pulling the lever located at the bottom right…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos