Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Inspection (Service) Warning in the Volkswagen Polo

Model: Volkswagen Polo Polo VI, Polo 6, MK 6, AW1, MK VI - Years 2017-2025
Part: Service warning light

These brief and simple steps will allow you to reset the inspection (service) warning in the Volkswagen Polo. First, get in the vehicle and start pressing and holding the button located at the bottom left of the instrument panel; then turn on the ignition, waiting for the confirmation prompt to reset the service, as shown in the video. At this point, release the button and press the right one once, confirming and performing the maintenance key reset; turn off the ignition and start the engine, checking the actual reset of the service light!

Posted on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Inspection Warning of the Volkswagen Polo
Resetting the Inspection Warning of the Volkswagen Polo
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) This guide explains the procedure to reset the inspection (service) warning of the Volkswagen Polo. First, get in the vehicle and press and hold the …
Reset of the inspection warning for the Volkswagen Polo.
Reset of the inspection warning for the Volkswagen Polo.
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The instructions provided in this guide will illustrate the procedure for resetting the inspection (service) warning of the Volkswagen Polo. First, l…
Reset the Volkswagen Polo inspection service reminder
Reset the Volkswagen Polo inspection service reminder
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Below we will see the instructions that will allow us to reset the service inspection warning of the Volkswagen Polo. First of all, we get on board t…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - What to do when the oil light comes on on Volkswagen Polo? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos