Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Key Remote Battery in a Volkswagen Arteon

Model: Volkswagen Arteon MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Key

Video tutorial

To change the battery of the remote control for a Volkswagen Arteon, first extract the mechanical key by pressing the side button on the remote. Locate the slot on the side of the key and, with a small flathead screwdriver or simply with your fingers, gently pry to separate the two halves of the casing.

Once the remote is open, remove the depleted button battery and insert a new one of the same type, respecting the indicated polarity. Close the remote by pressing the two parts together until they click and reinsert the mechanical key. Check that the buttons function correctly.


Posted on 2 October 2026 by ScegliAuto


Related tutorials

Volkswagen Arteon (2017-2024 / MK 1) In this short guide we will see the instructions that will allow us to access the fuse boxes, also finding the diagram and the diagram, of the Volksw…
Volkswagen Arteon (2017-2024 / MK 1) If you do not know how to correctly replace the battery of your Volkswagen Arteon key, do not worry as this new guide will provide you with all the n…
Volkswagen Arteon (2017-2024 / MK 1) If you are looking for a guide to help you correctly replace the battery inside your Volkswagen Arteon key, read the following instructions carefully…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos