Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Panel on a Volkswagen Golf

Model: Volkswagen Golf - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Door trim panel

Video tutorial

To remove the inner door panel on a Volkswagen Golf V, open the door and locate the fastening screws present in the handle and at the bottom of the panel. Remove any plastic covers if present and unscrew all the screws with a screwdriver.

Once removed, insert a plastic lever between the panel and the door metal and gently pry to unclip the fastening clips along the edge. When all clips are unclipped, lift the panel upwards to free it from the upper guide near the window.

Then disconnect the electrical connectors for the controls and the internal handle cable. At this point, the door panel can be completely removed.


Posted on 10 October 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Volkswagen Golf
How to Remove the Door Panel on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf VI, 5K1, Golf 6, MK 6) Today's instructions will show you the steps to remove and replace the front door panel on a Volkswagen Golf. First, open the front door and start by…
How to Remove the Door Panel of the Volkswagen Golf
How to Remove the Door Panel of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf V, Golf 5) Today, we will provide step-by-step instructions for removing and replacing the front door panel of the Volkswagen Golf. First, open the front door a…
How to Remove the Door Panel of the Volkswagen Golf
How to Remove the Door Panel of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf 4, MK 4, Golf IV) Today, you will see step-by-step instructions to remove and replace the front door panel of the Volkswagen Golf. First, open the front door and start…

How to reset the Service light of the Fiat 500X?

To reset the Service light of the Fiat 500X, insert the ignition key into the ignition switch to turn on the instrument cluster. Once powered on, press the accelerator pedal three times in quick succession. After this operation, wait a few seconds for the Service light reset to complete. Once the reset procedure is finished, release the pedals and then turn off the instrument cluster by turning the key.

Watch the video!


by ScegliAuto

More videos