Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tyre pressure warning light on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part:

See other generations:
Video tutorial

The instructions in this guide will allow you to reset the tyre pressure warning light on a Volkswagen Polo; before recalibrating the TPMS sensors, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; open the glove compartment and press and hold the reset button for the tyre pressure warning light until the warning light on the dashboard resets.

This way, you will have permanently cleared the TPMS warning!


Posted on 3 November 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Volkswagen Polo
How to Reset the Tyre Pressure Warning Light on the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) This guide illustrates how to reset the Tyre Pressure Monitoring System (TPMS) warning light on the Volkswagen Polo; before performing the reset, ens…
How to reset the tire pressure warning light on the Volkswagen Polo
How to reset the tire pressure warning light on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today's video will show us how to check and reset the tire pressure monitoring system (TPMS) light on the Volkswagen Polo; before performing the rese…
How to reset the tyre pressure warning light on the Volkswagen Polo
How to reset the tyre pressure warning light on the Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) In this video, we will see the procedure necessary to reset the tyre pressure warning light (TPMS) on the Volkswagen Polo; before performing the rese…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos