Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on a VW Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Headlight bulb

Replace the damaged front headlamp bulbs on the Volkswagen Polo. Lift the bonnet by pulling the lever located at the bottom right of the dashboard and secure it with the prop. Once you locate the inspection cap at the back of the headlamp, remove it. Pull the bulb holder out of the headlamp and extract the damaged bulbs using a screwdriver. Fit the new bulbs, insert the bulb holder back into the headlamp housing. Refit the headlamp covers and turn on the new bulbs of the VW Polo using the control knob.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Air Filter on the Volkswagen Polo
Replacement of the Air Filter on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Replacing the air filter that feeds the engine of the Volkswagen Polo is one of the operations included in the maintenance service. To do this, open …
How to Replace the Cabin Air Filter on the Volkswagen Polo 9N
How to Replace the Cabin Air Filter on the Volkswagen Polo 9N
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Periodically replacing the cabin air filter in your Volkswagen Polo 9N is very important to maintain a high level of air quality. Below, you will dis…
What is the fuse diagram for a Volkswagen Polo?
What is the fuse diagram for a Volkswagen Polo?
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) The attached video shows the fuse diagram for a Volkswagen Polo. To access the fuses, open the front door. Next, unclip and remove the side cover of …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos