Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove Boot Panel on VW Sharan

Model: Volkswagen Sharan MK 1, 7M - Years 1995-2010
Part: Door trim panel

Want to remove the boot lining on a Volkswagen Sharan? Here’s how to do it. Start by removing the rear seat. Unscrew the retaining screws of the rear seat. Use a plastic lever to remove the upper and lower side trim where the seat belt retractor is located, then open the flap above the panel and unscrew the retaining screws. Unscrew all the retaining screws of the side panel, remove the plastic entry of the boot. Detach the boot cover panel (disconnect the power connectors of the boot).

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear headlight bulb of the Volkswagen Sharan?
How do you replace the rear headlight bulb of the Volkswagen Sharan?
Volkswagen Sharan (1995-2010 / MK 1, 7M) In order to replace the rear headlight bulb of the Volkswagen Sharan, you need to open the hood so that you can locate the panel on the side of the t…
How to Remove the Door Panel of the Volkswagen Sharan
How to Remove the Door Panel of the Volkswagen Sharan
Volkswagen Sharan (1995-2010 / MK 1, 7M) Follow these brief steps to remove and replace the front door panel of the Volkswagen Sharan. First, open the front door and start by removing the wi…
How to replace the rear headlight bulb of the VW Sharan
How to replace the rear headlight bulb of the VW Sharan
Volkswagen Sharan (1995-2010 / MK 1, 7M) The steps to replace the rear headlight bulb of a Volkswagen Sharan model m7 are simple and quick to do independently. The first step is to open the …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos