Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Door Lock on a Golf Plus

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Door lock

If the door lock on your car is faulty and needs to be removed, we will show you how to do it. On this model, you can remove the outer door panel, which is held by several screws along its perimeter. Start by removing the side plastic covering part of these screws. You will then have access to the side, lower screws, and those next to the door hinges that need to be removed. Next, remove the external handle, secured by a removable pin through a hole on the side of the door, then disassemble both the fixed and movable parts. At this point, remove the last securing screw and the panel will come away. From here, you will have access to the faulty lock.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this brief guide, follow the steps to remove and replace the rear door lock module on a Volkswagen Golf. First, open the rear door of the vehicle …
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Learn how to remove the right front door lock from a Volkswagen Golf Mk5: disconnect the battery connectors located in the engine bay, then use a scr…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) This guide shows how to remove the internal lock located in the rear door of a VW Golf. Insert a metal key into the slot on the door (side panel), th…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2003-2008 - What to do if the door on Golf 5 does not open? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos