Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Door trim panel

This tutorial shows you how to remove the inner door panel of a fourth-generation Volkswagen Golf. First, remove the grab handle by prying it with a plastic tool at various points to release it. Then, use a screwdriver to unscrew the two screws located inside the holes. Next, unscrew the two screws at the bottom of the panel. After following these steps, gently pull the panel towards you to release it. Disconnect the window regulator connector, and you will have finished the job!

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel on Golf 4
Removing the Door Panel on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Remove the damaged door panel from the Golf 4. Disconnect the window switch panel, then unscrew the screws located in the handle area. Unscrew the sc…
Removing the Door Panel of a Volkswagen Golf 4
Removing the Door Panel of a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Let's remove the door panel of a Volkswagen Golf 4 (driver's side), and see how to proceed. Before starting the disassembly, disconnect the battery t…
Removing the Door Panel of a Volkswagen Golf
Removing the Door Panel of a Volkswagen Golf
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) Remove the door panel of a Volkswagen Golf (driver's side). Before starting the disassembly, disconnect the battery terminals located in the engine b…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos