Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove or Replace the Front Headlight on VW Golf MK5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Headlight

As usual, the first thing to do for mechanical or bodywork maintenance on cars is to immobilise the vehicle on a flat surface or on a ramp. Once done, to remove the front headlight assembly of the Volkswagen Golf, start by removing the grille mounted on the front. To do this, open the bonnet and unclip the clips holding it in place. Begin with the 2 clips on the upper edge (as shown in the video images) that you need to press to pull the grille out, then continue unclipping the other clips around the perimeter of the grille. Now, using the appropriate spanner, unscrew the screws that secure the headlight assembly in position. There are two at the top of the front, located in the areas shown in the video images, and one below the headlight, accessible through the hole occupied by the small grille under the headlight itself. Finally, after disconnecting the electrical supply, you can slide the headlight assembly out of its housing.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today's procedure will show us how to disassemble and replace the front headlight of the Volkswagen Golf, following the instructions below. First, op…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Burned out bulb? Today we explain how to replace it! Replacing the headlight bulb of the Volkswagen Golf 5 is a simple and quick operation to do inde…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) This tutorial shows how to remove the front headlamp of a Volkswagen Golf Mk5, produced from 2003 to 2008. Before removing the three screws that hold…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos