Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor from Volkswagen Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Starter motor

See other generations:
Video tutorial

In this video tutorial, you will see the main steps to remove the starter motor from a fifth-generation Volkswagen Golf. First, lift the bonnet and disconnect the battery terminals. Next, disconnect the intake hose and remove the air filter bracket and the entire airbox.

Now disconnect the electrical connector from the starter motor, as shown in the video, and undo the nut. Also, undo the central nut with a socket spanner and remove the bracket from the underside of the car. Once all bolts are removed, extract the starter motor!


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to Remove the Headlining of the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) When removing the roof of a car, including the Volkswagen Golf 6, it is done to replace the worn or dirty fabric covering, or in some cases, simply t…
Removing Front Headlight on Volkswagen Golf 6
Removing Front Headlight on Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this video, you will learn how to remove and replace the front headlight of a sixth series Volkswagen Golf. First, open and lift the bonnet and re…
Removing Rear Seats from a Volkswagen Golf 4
Removing Rear Seats from a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Unlike many modern cars where removing the seats is quite a hassle, on the Volkswagen Golf 4 it is a piece of cake, a really simple and quick procedu…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos