Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Wing Mirror from a Jetta

Model: Volkswagen Jetta A3, MK 3 - Years: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Side mirror

See other generations:
Video tutorial

To remove the external mirror from a VW Jetta, start by removing the window winder located on the panel. Take off the cover of the handle and the cover at the corner of the window.

Use a screwdriver to unscrew the screws located in the handle, then remove the handle from the trim near the lever (remove the securing screws). Unscrew the remaining screws on the door panel and detach the securing clips: grasp the panel with your hands and remove it. Locate the electrical connector for the mirror and disconnect it. Unscrew the screws of the mirror and remove it. Replace the old mirror with a new one.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to disassemble the external rearview mirror in the Volkswagen Jetta?
How to disassemble the external rearview mirror in the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) In this tutorial we can see how to disassemble the external rearview mirror in the Volkswagen Jetta, an extremely simple and quick operation. First o…
Removing the External Wing Mirror of the Volkswagen Jetta Mk5 - Golf 5
Removing the External Wing Mirror of the Volkswagen Jetta Mk5 - Golf 5
Volkswagen Jetta (2005-2010 / MK 5, A5) In today's video, we will see how to remove and replace the external wing mirror of the fifth series Volkswagen Jetta, as well as the Golf 5. First, …
Removing the Wing Mirror of a Volkswagen Jetta
Removing the Wing Mirror of a Volkswagen Jetta
Volkswagen Jetta (2010-2018 / MK 6, A6) Remove the wing mirror from a Volkswagen Jetta. Use a plastic-coated lever (rubber) to pry between the perimeter of the mirror frame and the glass. P…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos