Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement on Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Windshield wipers

See other generations:
Video tutorial

Gently lift the wiper arm, press the release button, and pull out the blade. To fit the new blade, simply slide it into the designated slot until you hear a "click" indicating that the blade is securely in place.

If you need to rest the wiper arm on the glass before fitting the blade, remember to place a cloth underneath the arm to avoid scratching the windscreen. The wiper blade on the rear arm of the car is removed in the same way: there is also a release button for removal.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Replacing Front Wipers on Volkswagen Polo
Replacing Front Wipers on Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this very simple video, you will learn how to remove and replace the front wipers on a Volkswagen Polo. First, lift the wipers and to remove them,…
Removing the Wiper Motor from a Volkswagen Polo
Removing the Wiper Motor from a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Below are the instructions that will allow you to remove and replace the wiper motor on a Volkswagen Polo. First, open the bonnet of the vehicle and …
Replacing the Windscreen Wiper Motor on the Volkswagen Polo
Replacing the Windscreen Wiper Motor on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Today's guide will show you the steps to remove and replace the wiper motor and mechanism on the Volkswagen Polo. First, open the bonnet and disconne…

    Frequently Asked Questions

    • Polo 2009-2017 - Why won't the Volkswagen Polo wipers turn off? Read answer
    • Polo 2017-2025 - What is the fuse that regulates the wiper water on the Volkswagen Polo 2018? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos