Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Exterior Mirror on a Golf 5

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Side mirror

See other generations:
Video tutorial

Using a small flat screwdriver, a plastic trim tool, or any sharp tool, detach the glass from the mirror from its support. Disconnect the heating connector.

Working slowly, remove the main cover by pulling it out from the clips that hold it in place. Be careful not to damage them.

If your intention is to replace the glass or the cover (or both), you have already seen how to do this; otherwise, if you also want to change the indicator bulbs, you will need to remove the black circular plastic on which they are mounted.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Replace the Outer Mirror Cap on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The following steps illustrate how to remove and replace the outer mirror cap on a Volkswagen Golf. First, move to the outside of the vehicle and sta…
Removing the External Wing Mirror from a Volkswagen Golf
Removing the External Wing Mirror from a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today, you will find the main instructions for removing the external wing mirror from a seventh-generation Volkswagen Golf. First, open the door and …
How to Replace the Wing Mirror Glass on Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) How to replace the external mirror glass on a Golf 7? This operation is not too complex; let’s see how to detach the glass from the mirror. Pry betwe…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos