Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan on Volkswagen Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Blower motor

This video provides the main instructions on how to remove the cabin heating fan from a fifth-generation Volkswagen Golf. First, get inside the vehicle and remove the glove compartment by unscrewing all the fastening screws; once removed, disengage all the plastic levers to take out the cabin heating fan, disconnecting its electrical connector as shown in the video. At this point, replace the fan or carry out the repair, and reassemble everything by reversing the disassembly procedure!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Coolant Level Sensor from a Volkswagen Golf
How to Remove the Coolant Level Sensor from a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Before starting, open the bonnet of your Volkswagen Golf. Begin by disconnecting the relevant electrical connector. Next, using pliers, unclip and re…
How to Remove the Armrest on the Centre Tunnel of a Volkswagen Golf
How to Remove the Armrest on the Centre Tunnel of a Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Let’s see how to remove the armrest on the centre tunnel of a Volkswagen Golf. Unscrew the securing screws (located inside the cup holder) with a scr…
How to Remove the Handbrake Button from a Volkswagen Golf 7
How to Remove the Handbrake Button from a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) How do you remove the handbrake button from a Volkswagen Golf 7? Let's look at the disassembly of the part. Position the gear knob vertically, then u…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos