Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan of the Volkswagen Golf.

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Blower motor

See other generations:
Video tutorial

In this guide, we will go through the instructions that will allow us to disassemble and replace the cabin fan of the Volkswagen Golf. First, we get inside the vehicle on the passenger side and start by removing the glove compartment; at the back, we find the cabin fan, which we can remove by unscrewing its screws and disconnecting the power wiring, as shown in the video.

At this point, we perform the repair or replacement of the cabin fan, installing it correctly; let's check its operation at various speeds.


Posted on 24 December 2025 by ScegliAuto


Related tutorials

Removing the Cabin Fan from the Volkswagen Golf
Removing the Cabin Fan from the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Below are the necessary instructions for removing and replacing the cabin fan from the Volkswagen Golf. First, get into the vehicle and start by remo…
Remove the Cabin Ventilation Fan from a Volkswagen Golf Mk5
Remove the Cabin Ventilation Fan from a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Remove the cabin ventilation fan from a Volkswagen Golf Mk5. The cabin ventilation fan is located directly under the dashboard: remove the plastic ri…
Removing the Cabin Fan Resistor on the Volkswagen Golf
Removing the Cabin Fan Resistor on the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today, we will learn how to remove and replace the cabin fan resistor on the Volkswagen Golf. First, get into the vehicle and begin by removing the p…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos