Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan from the Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Blower motor

See other generations:
Video tutorial

Below are the necessary instructions for removing and replacing the cabin fan from the Volkswagen Golf. First, get into the vehicle and start by removing the plastic cover located under the glove compartment, unscrewing the plastic screws; then disconnect the electrical connector of the cabin fan, unscrewing the fastening screws to remove it from the dashboard, as illustrated in the video.

At this point, install the new cabin fan, connecting it electrically and checking its operation; then reassemble everything!


Updated on 14 August 2026 by ScegliAuto


Related tutorials

Removing the Cabin Fan Resistor on the Volkswagen Golf
Removing the Cabin Fan Resistor on the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today, we will learn how to remove and replace the cabin fan resistor on the Volkswagen Golf. First, get into the vehicle and begin by removing the p…
Removing the Fan Resistor on a Volkswagen Golf Mk4
Removing the Fan Resistor on a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video tutorial, you will learn how to remove the fan resistor from the cabin of a Volkswagen Golf Mk4. First, get inside the car and remove t…
How to disassemble the cabin fan of the Volkswagen Golf
How to disassemble the cabin fan of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) These short and simple steps will guide us through the process of disassembling and replacing the cabin fan of the Volkswagen Golf. First, we climb a…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos