Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil in a Volkswagen Passat?

Model: Volkswagen Passat B6, 3C - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

See other generations:
Video tutorial

Before you start, open the bonnet of your Volkswagen Passat. Begin by removing the dipstick to check the engine oil level.

Once done, put the car in first gear and engage the handbrake, then lift the vehicle. At this point, unscrew and remove the lower nut from the oil sump to drain all the engine oil. Once all the oil has drained, re-screw the drain nut, and then lower the vehicle.

After lowering the vehicle, you can add the new oil, and you will have successfully completed the change.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

Volkswagen Passat (2014-2023 / MK 8, 3G, B8) Before you start, open the front bonnet of your Volkswagen Passat. Begin by extracting the engine oil dipstick. Next, put the car in first gear and e…
Volkswagen Passat (2005-2010 / B6, 3C) The author of this video shows how to independently carry out a service on the Volkswagen Passat B6. The first step is to work inside the engine bay.…
Volkswagen Passat (2005-2010 / B6, 3C) In this video, we will show you how to replace the rear wiper blade on a Volkswagen Passat Saloon. Grasp the rear wiper blade with your hands, gently…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos