Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Tiguan
    4. : Replacement mirror arrow bulb on Volkswagen Tiguan MK2

Volkswagen Tiguan - Video tutorial

Model: Volkswagen Tiguan AD, MK 2, BW - Years 2016-2024
Part: Side turn signal light bulb
Operation: Replacement mirror arrow bulb on Volkswagen Tiguan MK2

Today we will see, in this video tutorial, how to remove and replace the rear-view mirror arrow bulb on a second series Volkswagen Tiguan. First we go to lever on the mirror glass to remove it; then we disconnect the connector on the back. At this point we are going to unhook the tabs of the external cover, in order to remove it, and unscrew the screws that we find inside using a T15 torx key; now we can disconnect the electrical connector of the arrow in order to replace the bulb. Reverse the procedure for reassembly!


Posted on 24 January 2024 by ScegliAuto



How to replace the mirror bulb on the Volkswagen Tiguan?
Volkswagen Tiguan (2016-2024 / AD, MK 2, BW) In order to replace the Volkswagen Tiguan mirror bulb, you need to use a lever to be able to detach the mirror glass from the inside of the shell. At
How to replace the mirror bulb on the Volkswagen Tiguan?
Volkswagen Tiguan (2016-2024 / AD, MK 2, BW) The replacement of the exterior mirror bulb on the Volkswagen Tiguan is done by prying it with a thin object, so that the hood can be detached. Below
how to remove the mirror from the mirror on Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / MK 1, 5N) Let's see how to remove the exterior mirror mirror on Volkswagen Tiguan. With a lever with a plastic or rubber coating, we go to pry between the peri

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos