Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

If you have a Volkswagen and the immobiliser light (yellow with a key symbol) is flashing, there could be several causes. The first (and most likely) is that you need to change the battery in the key itself.

To do this, refer to the video: remove the top part of the key using a flat screwdriver, then open the central body. At this point, it will be easy to slide out the small battery (you may use the same flat screwdriver to help) and insert the new one. Reassemble everything by first replacing the central body and then the top part: just snap the various pieces back together.

If the cause was not the key battery, it means there is a problem with the control unit: this can happen especially if there has just been some specific work done, for example, connecting your insurance's satellite navigation system.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) In this video, we clearly understand what the flashing glow plug light on the instrument panel means in this case for a Volkswagen Golf VI, but gener…
Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) Today, we will explain how to turn on the front headlights of a Volkswagen Golf 7. To turn on the headlights, first start the vehicle. Next, rotate t…
Volkswagen Golf (2003-2008 / Golf 5, Golf V, MK 5) Before starting, open the bonnet of your Volkswagen Golf. Begin by disconnecting the relevant electrical connector. Next, using pliers, unclip and re…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos