Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Touran
    4. : How to change a brake light bulb on Vw Touran

Volkswagen Touran - Video tutorial

Model: Volkswagen Touran 1T, MK 1 - Years 2003-2015
Part: Rear light bulb
Operation: How to change a brake light bulb on Vw Touran

How to change a rear light bulb on Vw Touran? We lift the tailgate of the luggage compartment and see the disassembly of the headlight to access the damaged bulbs. Remove the plastic cover on the sides of the rear light, unscrew the fastening screws on the side of the light with a screwdriver. We detach the rear light from its housing once all the screws have been removed (remove the power supply terminals) and replace the damaged bulbs with new ones (size and voltage equal). We assemble the headlight after replacing all the damaged bulbs and test the operation.


Posted on 2 February 2024 by ScegliAuto



Replacing the rear brake light bulb in the Volkswagen Touran.
Volkswagen Touran (2003-2015 / 1T, MK 1) Before replacing the stop light bulb in the 2006 Volkswagen Touran, we proceed with arranging the car itself, on a plane or on the bridge, in order t
How to replace the headlight bulb on a Volkswagen Touran
Volkswagen Touran (2003-2015 / 1T, MK 1) Before we can begin, we will have to go and open the front hood of our Volkswagen Touran. So let's start by going to disengage and remove the rear co
Replacement of the front headlight bulb of the Volkswagen Touran.
Volkswagen Touran (2003-2015 / 1T, MK 1) Let's see, in simple and quick steps, how to disassemble and replace the headlight bulb of the Volkswagen Touran. First, we open the engine hood of o

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos