|
Do it yourself
| |||
| ||||
How to Replace the External Wing Mirror on a Volkswagen Passat
Model: Volkswagen Passat
3BG, B5
- Years:
1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Video tutorial
Before you start, open the door of your Volkswagen Passat. Begin by unclipping and removing the window switch panel, then disconnect the relevant electrical connector. Next, unscrew and remove the screws securing the door panel. After that, unclip and pull away the door panel, then disconnect the various cables and electrical connectors, and unclip and move the internal cover near the external wing mirror. This will give you access to the mirror's fixing nuts. Proceed to disconnect the relevant electrical connectors, then unscrew and remove the fixing bolt. At this point, extract and remove the external wing mirror, completing the disassembly. To install the new mirror, follow this procedure in reverse, and the replacement will be finished.
Updated on 17 April 2026 by ScegliAuto
Related tutorials
Volkswagen Passat
(2005-2010 /
B6, 3C)
In this tutorial we can see how to dismantle the external rearview mirror in the Volkswagen Passat, an extremely simple and fast operation. First of …
Volkswagen Passat
(2005-2010 /
B6, 3C)
In this video tutorial, you will learn how to remove and replace the external wing mirror of the Volkswagen Passat by following these simple steps. F…
Volkswagen Passat
(1996-2005 /
3BG, B5)
To replace the external wing mirror on the Volkswagen Passat, remove the corresponding door panel. To do this, detach the trim located on the armrest…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
What does the red or orange zig-zag warning light mean on the Dacia Sandero?
In this video, you will learn what the warning light depicting a red or orange zig-zag on the dashboard of the Dacia Sandero means. This is a multifunction warning light; if it appears red, it is a prompt to stop as soon as possible, switch off the engine, and exit the vehicle quickly, contacting a recovery service and the Dacia Dealer. If it lights up orange, it indicates an electronic fault in the vehicle; you can continue driving, but you must reach a Dacia service centre as soon as possible. If it lights up alongside the spanner symbol, it means it is time for a service, which is due every year or 10,000 miles (whichever comes first). The service is mandatory to maintain the warranty. If it lights up together with the tyre warning light, it indicates a loss of pressure in one of the tyres. You should check all the tyres as soon as possible to identify the source of the pressure loss. If it stays on with the engine warning light, it indicates a problem with the vehicle's emissions system; if it flashes, the issue may be a component of the engine, such as the spark plugs or coil, for example. On diesel versions, it may light up alongside the glow plug symbol, indicating a related issue. If it lights up with the ESP symbol, it means there is a fault in the system that needs checking. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.012
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |