Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Antenna on a Volkswagen Tiguan MK1

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Antenna

See other generations:
Video tutorial

In today's video, you will see the basic instructions to remove and replace the radio antenna on a first-generation Volkswagen Tiguan; this procedure can be applied to most vehicles with the antenna located on the rear of the roof. First, open the boot and start by removing the headlining around the antenna; then, unscrew the antenna nut to remove it from the outside, as shown in the video.

Finally, replace it with the new one, applying the reverse procedure!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Antenna on Volkswagen Tiguan MK1
How to Replace the Antenna on Volkswagen Tiguan MK1
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this short video, we will see how to remove and replace the antenna on a first-generation Volkswagen Tiguan, following these simple instructions. …
How to Replace the Gearbox Oil in a Volkswagen Tiguan?
How to Replace the Gearbox Oil in a Volkswagen Tiguan?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) To replace the gearbox oil in a Volkswagen Tiguan, lift the vehicle to access the components underneath the engine bay. Locate the gearbox oil drain …
How and when to replace the timing belt of the Volkswagen Tiguan 2.0 TDI
How and when to replace the timing belt of the Volkswagen Tiguan 2.0 TDI
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today we will discover all the information related to the replacement of the timing belt of the Volkswagen Tiguan 2.0 TDI; depending on the year of c…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos