Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for Removing the Headlining on Volkswagen Golf 6

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012

In this description, you will find essential instructions for removing the headlining of a sixth-generation Volkswagen Golf. To remove the headlining, you need to take off all components attached to it; start by removing the sun visors and grab handles by unscrewing the fixing screws; then remove the interior light fittings by prying them off and disconnecting the electrical connectors of the bulbs. At this point, remove the side pillars of the seatbelts and gently start pulling down the headlining as shown in the video!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) It will be possible to replace the headliner of the Volkswagen Golf by unscrewing all the screws or removing the clips that prevent the removal of th…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Remove the trim plastics beneath the panel to begin. Remove the side handles of the headlining with a screwdriver, then remove the sun visors and the…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To remove it from the rear of the roof, you need to lower the headlining; start by unclipping the plastic trim at the rear located right on the edge …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos