Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Windscreen Washer Reservoir on a Volkswagen Golf MK4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003

See other generations:
Video tutorial

Below are the instructions for removing the windscreen washer reservoir on a fourth generation Volkswagen Golf, in simple steps. First, open the bonnet of your car and disconnect the electrical connector found at the bottom of the reservoir; then, using a socket wrench, unscrew the fixing screws of the bracket to lift and remove it, as illustrated in the video.

Finally, disconnect the pump from the washer reservoir to replace it with the new one; apply the reverse procedure for reassembly!


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen Washer Nozzles on the Volkswagen Golf - Jetta
How to Replace the Windscreen Washer Nozzles on the Volkswagen Golf - Jetta
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this brief and simple guide, remove and replace the windscreeen washer nozzles on the Volkswagen Golf and Jetta. First, open the bonnet of your ca…
How to Remove the Windscreen Washer Reservoir from the Volkswagen Golf GTI?
How to Remove the Windscreen Washer Reservoir from the Volkswagen Golf GTI?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To replace the windscreen washer reservoir on the Volkswagen Golf GTI, you must remove the bumper by loosening all the bolts located at the top and i…
Replacing the Windscreen Washer Fluid Reservoir of a Volkswagen Golf
Replacing the Windscreen Washer Fluid Reservoir of a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, we will discover the instructions that will allow you to remove and replace the windscreen washer fluid reservoir of a Volkswagen Golf. First,…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos