|
Do it yourself
| |||
| ||||
Removal of the Left Front Door Lock
Model: Volkswagen Golf
Golf 5, MK 5, Golf V
- Years:
2003, 2004, 2005, 2006, 2007, 2008
Video tutorial
Once the panel is freed from the upholstery, remove the perimeter screws that secure it to the door structure. There are two covers on the panel that need to be removed, exposing the screws that anchor the window to the support connected to the window regulator motor. Take great care: to remove the glass, the screws must align with the holes on the panel, so the window must be lowered until this alignment is found. Once the screws are removed, this height will be necessary and sufficient to extract the glass from the door by sliding it upwards. Next, remove the window regulator motor, which is held by additional perimeter screws. Detach the panel from the door, which adheres via an adhesive that may also serve as a seal, and the locking pin. At this point, you can remove the locking device on the side of the door by removing the two screws present. The lock can then be removed by unscrewing the screw accessible through a hole on the side of the door. Use a screwdriver to extract the lock from the outside and disconnect it by unlocking a catch on the handle, releasing the locking device from the handle itself. At this point, the lock is completely disassembled.
Updated on 8 February 2026 by ScegliAuto
Related tutorials
Volkswagen Golf
(1997-2003 /
Golf IV, Golf 4, MK 4)
Removing the handle on the Golf 4? Let's see how to remove the handle from the right front door. Open the door, remove the cover cap from the hole, a…
Volkswagen Golf
(2003-2008 /
Golf 5, MK 5, Golf V)
Is the handle on your Golf 5 broken? Remove the handle along with the lock. Open the car door, unscrew the screw located inside the door (on the side…
Volkswagen Golf
(2012-2019 /
MK 7, Golf 7, Golf VII)
Removing the handle from a Golf 7? Want to take it out from inside the door? Here’s how to remove and replace it. Unscrew the screw located on the si…
Other guides you may be interested in
|
How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |