Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Seal on a Volkswagen Golf?

Model: Volkswagen Golf Golf 2, MK 2 - Years: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992
Part: Key

See other generations:
Video tutorial

To replace the window seal on a Volkswagen Golf, first remove the caps located at both ends of the seal along the glass. Once the caps are removed, use a lever tool to pull out the old seal.

After the old seal is removed, insert the new one by fitting it into its housing. Once the new seal is in place, reinstall the caps at both ends; after installation, check the proper functioning of the glass.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

Replacement of Intake Manifold Gaskets
Replacement of Intake Manifold Gaskets
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Here is the video guide to understand where to intervene and what to do to change the intake manifold gaskets. As shown in the images, take the compl…
Removing the Rear Triangular Glass on a Volkswagen Golf MK7
Removing the Rear Triangular Glass on a Volkswagen Golf MK7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video tutorial, you will learn how to remove and replace the rear side triangular glass on the seventh series Volkswagen Golf, following the …
How to Remove the Rear Glass on a Volkswagen Golf?
How to Remove the Rear Glass on a Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) To remove the rear glass on a Volkswagen Golf, open the car door and loosen the screws securing the door panel. By unfastening its clips and disconne…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos