Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Glass on a Volkswagen Golf?

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Checks and maintenance

To remove the rear glass on a Volkswagen Golf, open the car door and loosen the screws securing the door panel. By unfastening its clips and disconnecting the connectors, you can remove the door panel and unscrew the screws that secure the inner panel. This will allow you to lower the rear glass and remove the seals around it so that it can be taken out of its housing. The new glass should then be inserted along with the seals and the panel.

Updated on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) To replace the window regulator on a Volkswagen Golf, remove the cover from the inner door handle and loosen the screws underneath. Next, loosen the …
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today's guide will show you the main steps on how to remove and replace the rear side window of the Volkswagen Golf. First, open the rear door and be…
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) Today's step-by-step instructions will show us how to disassemble and replace the window lift motor of the Volkswagen Golf. First, we open the front …

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos