Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Windscreen Wiper Control Lever on a Volkswagen Golf?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

In this video tutorial, see how to remove the windscreen wiper control lever on a Volkswagen Golf 5. First, remove the steering wheel. This is relatively simple, but pay close attention to the airbag; remember to disconnect the battery before starting. Once the steering wheel is removed, get a flat and sturdy tool. In the video, a kitchen knife is used, but any equivalent tool will suffice. Insert it into the left slot of the lever to unlock the internal clip, as shown in the video, and loosen the clip on the opposite side using a screwdriver. This will unlock the lever, allowing you to extract it from the main block.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) This video shows how to disassemble and replace the indicator stalk on a fourth-generation Volkswagen Golf, as well as on the Jetta, Bora, and Passat…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) How to remove the front wiper motor on a Golf 4? Start by pulling the plastic lever located at the bottom left of the dashboard, then lift the bonnet…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Today, we will see in this video tutorial how to dismantle and replace the front wiper motor of the Volkswagen Golf in simple and quick steps. First,…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos