Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from the Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years 2007-2016
Part: Car stereo

In this brief and simple video, learn how to remove the standard radio from the Volkswagen Tiguan by following the instructions below. First, get inside the vehicle and gently remove the side trim using a thin plastic lever; then, unscrew the screws of the radio located underneath, disconnecting the electrical connectors found at the back, as shown in the video. At this point, replace the standard radio with the new one of the correct type, applying the reverse procedure for reassembly!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from the 2014 VW Tiguan
How to Remove the Radio from the 2014 VW Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Removing the radio from the 2014 Volkswagen Tiguan is a straightforward task to do yourself. The first step is to remove the centre console; to do th…
How to replace the radio of the 2012 VW Tiguan
How to replace the radio of the 2012 VW Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Replacing the radio of the 2012 Volkswagen Tiguan is a very simple operation to perform independently, as it does not require the use of special tool…
How to Upgrade the Radio in a Volkswagen Tiguan with Bluetooth Connection
How to Upgrade the Radio in a Volkswagen Tiguan with Bluetooth Connection
Volkswagen Tiguan (2007-2016 / 5N, MK 1) To remove the radio from a Volkswagen Tiguan, use a screwdriver to take off the upper left grille and the passenger airbag module. Disconnect the con…

    Frequently Asked Questions

    • Tiguan 2016-2025 - How do you activate voice commands on Volkswagen Tiguan 2? Read answer
    • Tiguan 2007-2016 - What to do if the Volkswagen Tiguan touch screen does not work? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos