Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the radio of the 2012 VW Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Car stereo

See other generations:
Video tutorial

Replacing the radio of the 2012 Volkswagen Tiguan is a very simple operation to perform independently, as it does not require the use of special tools. We insert a plastic lever inside the upper vent in order to remove it and proceed in the same way with the vent next to it. We unscrew the screws inside and remove the radio cover.

We loosen the clamp and remove the radio. On the back of the radio we find the fuse that could be the cause of the radio not working.

We disconnect the radio connector and proceed with the installation of the new radio by following the reverse procedure.


Posted on 28 January 2025 by ScegliAuto


Related tutorials

Remove the radio from the Tiguan
Remove the radio from the Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Do you want to remove the radio from the Tiguan? Let's look at how to take out all the parts to replace the radio. Enter the vehicle and locate the p…
Removing the Radio from the Volkswagen Tiguan
Removing the Radio from the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this brief and simple video, learn how to remove the standard radio from the Volkswagen Tiguan by following the instructions below. First, get ins…
How to replace the car radio in the Volkswagen Tiguan?
How to replace the car radio in the Volkswagen Tiguan?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this tutorial we can see how to replace the car radio in the Volkswagen Tiguan, an extremely simple and quick operation. First of all, make sure t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos