Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to reset the service light on Volkswagen Polo 2020

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: -board computer
Operation: How to reset the service light on Volkswagen Polo 2020

To reset the oil change service light on the Polo it is necessary to follow the following procedure: turn on the ignition and, next to the touch display on the central tunnel, click on "menu", then on the touch click on "vehicle menu" and then click on "settings" and then scroll through the functions to "service", from here you can check how long the service has expired. To actually reset the signal, turn on the ignition, locate the "00" button in the center of the dashboard under the display between the tachometer and the odometer and press it for a few seconds until the indication "Do you want to reset the service?" , at that point press the "00" key again for just a moment, consequently the service signal will have been reset.


Posted on 23 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Polo 2009-2017 - What does the engine malfunction warning light on the Volkswagen Polo mean? Read Answer
    • Polo 2017-2025 - What to do if voice control on the Volkswagen Polo is not available? Read Answer
    • Polo 2017-2025 - Why does the center display of the Volkswagen Polo 6 not work? Read Answer
    • Polo 2009-2017 - How to reset the tire warning light in a Wolksvagen Polo? Read Answer
    • Polo 2009-2017 - What does the Volkswagen Polo "Insp" light mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos