Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Maintenance Light on a Volkswagen Passat

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Warning light – error code

In this tutorial, you will see how to reset the maintenance light on a Volkswagen Passat by following a few simple steps: first, perform maintenance such as changing the engine oil and filters. Next, get into your vehicle; to reset, use the button located at the bottom right of the speedometer with the symbol of a spanner. Close all the doors of the vehicle and press and hold the previously described button while simultaneously turning on the ignition. Then release the button; within 20 seconds, press the button again to reset the service light. Turn off and then turn on the ignition to check if the light has turned off.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Passat (2005-2010 / B6, 3C) To reset the "Service" light on a Volkswagen Passat, start the instrument panel without turning on the engine. Use the controls on the steering wheel…
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) In this brief guide, you will find instructions to reset the service light for the regular maintenance of the engine oil change on a Volkswagen Passa…
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) This guide shows how to reset the engine oil change light on a Volkswagen Passat B8. The procedure is very simple and quick, requiring no specific to…

Other guides you may be interested in

    Frequently Asked Questions

    • Passat 2005-2010 - What does the flashing glow plug warning light on the Volkswagen Passat indicate? Read answer
    • Passat 2005-2010 - What is the car radio code of a Volkswagen Passat? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos