Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the 2015 Volkswagen Passat

Model: Volkswagen Passat MK 8, 3G, B8 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Warning light – error code

See other generations:
Video tutorial

In this new guide, you will discover the steps to correctly reset the maintenance light on the instrument panel of your 2015 Volkswagen Passat. First, turn on the ignition and simultaneously press and hold the "Reset" button located in the lower right corner of the dashboard.

Wait a few seconds, then release the "Reset" button and confirm the reset of the light when prompted on the display. Once the reset is complete, you can turn off the ignition and you are done.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Volkswagen Passat
How to Reset the Service Light on the Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) Contrary to what one might think, resetting the service light on your Volkswagen Passat B5 is not difficult and only takes a few seconds. Before disc…
How to Reset the Engine Oil Change Warning Light on a Volkswagen Passat
How to Reset the Engine Oil Change Warning Light on a Volkswagen Passat
Volkswagen Passat (2014-2023 / MK 8, 3G, B8) Today's step-by-step instructions will guide you through the process of resetting the service warning light for the engine oil change on a Volkswagen…
How to reset the service light on the Volkswagen Passat
How to reset the service light on the Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) After performing the routine maintenance check, replacing the engine oil, it is necessary to reset the service light; let's see how to do it on the V…

    Frequently Asked Questions

    • Passat 2005-2010 - What is the car radio code of a Volkswagen Passat? Read answer

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos