Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Hydraulic Struts on the Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Hydraulic pistons

In this video tutorial, you will learn how to replace the hydraulic struts of the rear tailgate on the Volkswagen Polo. First, open the rear tailgate and start by unfastening the small metal clip located at the base of the hydraulic strut, using a thin lever like a flat screwdriver; then unfasten the strut from the top of the tailgate, as shown in the video. At this point, replace the hydraulic struts with new ones, ensuring they are properly attached to the side pins!

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) Follow this guide for instructions on preparing the hydraulic lifters before reassembly or installation on the 1.4 engine of the Volkswagen Polo. Fir…
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) In this short and simple guide, learn how to remove and replace the hydraulic lifters of the Volkswagen Polo 1.0, with the engine block on the bench.…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) This guide shows how to replace the air conditioning radiator of the Volkswagen Polo 9N. Open the bonnet and disconnect the battery cover and the neg…

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos