Do it yourself
Frequently asked questions about cars and motorcycles

How to Prepare the Hydraulic Lifters of the Volkswagen Polo 1.4

Model: Volkswagen Polo MK III, Polo III, Polo 3, MK 3, 6N - Years 1994-2003

Follow this guide for instructions on preparing the hydraulic lifters before reassembly or installation on the 1.4 engine of the Volkswagen Polo. First, immerse the hydraulic lifters in the engine's lubricating oil to properly lubricate the seals; then, immerse the lifter caps in the oil as shown in the video. At this point, the lifters are ready to be installed on the cylinder head, following the procedure indicated in the engine's instruction manual!

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) In this short and simple guide, learn how to remove and replace the hydraulic lifters of the Volkswagen Polo 1.0, with the engine block on the bench.…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this video tutorial, you will learn how to replace the hydraulic struts of the rear tailgate on the Volkswagen Polo. First, open the rear tailgate…
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) The fuse and relay box on a Volkswagen Polo is located in the engine bay, right next to the battery. Fuse number 1 controls Alternator C and voltage …

Other guides you may be interested in

How to Replace the Cabin Filter on the Opel Grandland X

If you own an Opel Grandland X and want to know the steps to replace the cabin air filter, carefully read the following guide and follow the described steps. First, enter the vehicle and go to the passenger side. Then, locate the box containing the air filter in the lower side area of the dashboard. Remove the cover of the box and finally replace the old filter with the new one. Refit the cover, and you are done.

Watch the video!


by ScegliAuto

More videos