Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cylinder Head Gasket on a Volkswagen Polo 1.2

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cylinder head

See other generations:
Video tutorial

Today, follow these main instructions to remove and replace the cylinder head gasket on a Volkswagen Polo 1.2. First, open the bonnet of your car and start lifting the engine from below by removing the engine mount (loosening the bolts with a socket spanner); then, unscrew the bolts of the intake manifold, disconnecting the various pipes and wiring to remove it, as shown in the video.

At this point, remove the timing cover and then the chain, followed by the cylinder head cover; finally, unscrew the bolts of the cylinder head to remove and replace the gasket!


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cylinder Head Gasket on the Volkswagen Golf?
How to Replace the Cylinder Head Gasket on the Volkswagen Golf?
Volkswagen Polo (1981-1994 / Polo II, Polo 2, MK 2, 86C) To replace the cylinder head gasket on the Volkswagen Polo, open the bonnet to access the components located inside the engine compartment: at the to…
How to Replace the Windscreen and Seal of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this guide, learn how to remove and replace the front windscreen of the Volkswagen Polo, along with its seal. First, open the bonnet and start by …
How to Replace the Spark Plugs on a Volkswagen Polo
How to Replace the Spark Plugs on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) How to remove and replace the spark plugs on a Volkswagen Polo? Learn how to proceed: open the engine bay and lift the front bonnet, secure it, and d…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos