Do it yourself
| ||||
|
Volkswagen Polo - Video tutorial
Model: Volkswagen Polo
Polo II, Polo 2, 86C, MK 2
- Years 1981-1994 The replacement of the cylinder head gasket of the Volkswagen Polo is carried out by opening the hood, so that access to the components located inside the engine compartment can be obtained: at the top, it will be possible to locate the valve cover, which must be removed by loosening the screws. After removing the valve cover, it will be possible to proceed by loosening the screws that fix the engine cylinder head, removing it completely. Underneath it, the gasket will be present, which can be removed from its housing and replaced with a new one.
Posted on 13 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |