|
Do it yourself
| |||
| ||||
How to change the engine oil and filter of the Volkswagen Polo
Model: Volkswagen Polo
MK 6, Polo 6, AW1, MK VI, Polo VI
- Years:
2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Video tutorial
On the Volkswagen Polo, the engine oil change and filter replacement takes place between the engine compartment and the underside of the car. The video begins by preparing the car and the work area, then moves on to draining the oil: from underneath, the drain point is accessed, and the used oil is allowed to flow into a container, waiting for it to finish draining before closing it up. Still on the Volkswagen Polo, after draining, the oil filter is addressed. The filter is unscrewed and carefully removed because it is normal for some residual oil to still drip. Before installing the new filter, the seating is cleaned, then the replacement is screwed into position until it is properly seated, without forcing it. After finishing the underside, the video returns to the engine compartment for topping up the new oil. In the video, the filling is shown from the filler cap, and at the end of the operation, the oil level is checked to ensure it is correct.
Posted on 17 January 2026 by ScegliAuto
Related tutorials
Volkswagen Polo
(2009-2017 /
6R, MK V, Polo 5, Polo V, MK 5)
In this video tutorial, you will see how to replace the engine oil and oil filter on a Volkswagen Polo 1.2 TSI. First, open the bonnet and remove the…
Volkswagen Polo
(2009-2017 /
6R, MK V, Polo 5, Polo V, MK 5)
To change the engine oil and filter in a Volkswagen Polo, park the vehicle on a flat surface, turn off the engine, and open the bonnet. Unscrew the o…
Volkswagen Polo
(2001-2009 /
MK IV, Polo 4, 9N, MK 4, Polo IV)
Before starting, gather all the necessary tools listed at the beginning of the video, as well as new engine oil and a new filter. Begin by lifting th…
Other guides you may be interested in
|
How to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.075
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |