Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Hydraulic Lifters of the Volkswagen Polo 1.0

Model: Volkswagen Polo Polo 3, MK III, 6N, Polo III, MK 3 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003

See other generations:
Video tutorial

In this short and simple guide, learn how to remove and replace the hydraulic lifters of the Volkswagen Polo 1.0, with the engine block on the bench. Start by removing the plastic protective cover; then, unscrew the cylinder head cover, followed by removing the timing cover as shown in the video.

Next, remove the V-belt and the crankshaft pulley, taking off the timing belt; unscrew the cylinder head bolts to remove it, then proceed with the replacement of the lifters, following the video tutorial to the end!


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Prepare the Hydraulic Lifters of the Volkswagen Polo 1.4
How to Prepare the Hydraulic Lifters of the Volkswagen Polo 1.4
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) Follow this guide for instructions on preparing the hydraulic lifters before reassembly or installation on the 1.4 engine of the Volkswagen Polo. Fir…
Replacing the Hydraulic Struts on the Volkswagen Polo
Replacing the Hydraulic Struts on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this video tutorial, you will learn how to replace the hydraulic struts of the rear tailgate on the Volkswagen Polo. First, open the rear tailgate…
Replacing the Water Pump on a Volkswagen Polo 1.2 TSI
Replacing the Water Pump on a Volkswagen Polo 1.2 TSI
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Follow these main instructions to remove and replace the water pump on a Volkswagen Polo 1.2 TSI. First, open the bonnet of your car and start draini…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos