Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Oil and Oil Filter on the Volkswagen Voyage

Model: Volkswagen Voyage NF, G5 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

To replace the oil and oil filter on your vehicle, refer to the video and this description for guidance. First, open the hood and lift the vehicle.

Remove the oil filler cap located on top of the engine. Then, go underneath the vehicle and locate the oil drain plug.

Unscrew it, making sure to place a container on the floor to catch the used oil. Allow all the oil to drain out, then screw the plug back in. Next, locate the oil filter, unscrew it with the appropriate wrench, and take the new filter, remembering to replace the o-ring gasket.

Screw in the new filter, then access the engine compartment from above to fill the system with new oil, and finally check the level with the dipstick.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Volkswagen Voyage (2008-2023 / NF, G5) Let's briefly review the instructions needed to perform the routine maintenance service by replacing the engine oil and oil filter on the Volkswagen …
Volkswagen Voyage (2008-2023 / NF, G5) Here are the main steps to remove and replace the manufacturer emblems on the Volkswagen Voyage. First, remove the manufacturer emblem located on the…
Volkswagen Voyage (2008-2023 / NF, G5) To replace the radiator on a Volkswagen Voyage, open the hood to access the screws that secure the front bumper from the top. Once these are removed,…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Remote Battery of the Citroën C5 Aircross?

To replace the remote battery of the Citroën C5 Aircross, first remove the key from the device by sliding it out from the top. Once the key is removed, use a thin object to pry open the back cover of the device. This will allow you to detach the cover and access the battery underneath. At this point, you can insert a new battery and then cover everything with the corresponding panel.

Watch the video!


by ScegliAuto

More videos