|
Do it yourself
| |||
| ||||
Fuse Diagram for the Volkswagen Golf
Model: Volkswagen Golf
MK 6, Golf VI, Golf 6, 5K1
- Years 2008-2012
This vehicle from the German manufacturer has two main fuse boxes. The first is located in the cabin on the left side of the dashboard corresponding to the driver's door, while the second box is in the engine compartment next to the battery on the right side. Below is the fuse diagram for the engine compartment: F17 fifteen Horn; F24 ten Radiator fan; F26; FA 16 thirty Fog light; F26; FA 16 thirty Rear fog light; F8 25/15 Radio; F26 thirty Heated washer jets; F26 thirty Left headlamp; FA 16 thirty Right headlamp; F18 thirty Audio system; F26 thirty Left position light; F4; F25 20/40 ABS, ESP; F26 thirty Left turn signal; FA 16 thirty Right turn signal; FA 16 thirty Right brake light; F26 thirty Left brake light; F19 thirty Windscreen wiper.
Updated on 22 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
Today's guide shows the fuse diagram and positioning for the Volkswagen Golf. First, open the bonnet and locate the external fuse box; it is found at…
Volkswagen Golf
(2012-2019 /
Golf VII, MK 7, Golf 7)
Today, we will discover the instructions regarding the diagram and location of the external fuse box for the Volkswagen Golf. First, open the bonnet …
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
In this guide, we will see the positioning and diagram of the fuse boxes of the Volkswagen Golf. First, we open the hood of the car and start removin…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.186
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |