Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Brake Pads on the Volkswagen Ameo

Model: Volkswagen Ameo MK 1 - Years: 2016, 2017, 2018, 2019, 2020
Part: Brake pads

Video tutorial

Follow this guide to replace the front brake pads on the Volkswagen Ameo in simple and quick steps. First, lift the vehicle and start removing the front wheel; then, unscrew the bolts securing the front brake caliper to remove it from the brake rotor, as shown in the video.

At this point, remove the old brake pads and replace them with new, high-quality ones; clean the caliper from dirt and push the piston back using a lever on the sides. Finally, reinstall the brake caliper!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

Volkswagen Ameo (2016-2020 / MK 1) To replace the battery in a Volkswagen Ameo, open the hood to access the components inside the engine compartment. On the right side, you will find t…
Volkswagen Ameo (2016-2020 / MK 1) Here are the main instructions on how to remove and replace the front door panel of the Volkswagen Ameo. First, open the front door and start removin…
Volkswagen Ameo (2016-2020 / MK 1) To replace the headlight bulb on the Volkswagen Ameo, open the hood to access the top of the headlights. Here you will find the mounting bolts that n…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos