Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Headlight Bulb on the Volkswagen Ameo?

Model: Volkswagen Ameo MK 1 - Years: 2016, 2017, 2018, 2019, 2020
Part: Headlight bulb

Video tutorial

To replace the headlight bulb on the Volkswagen Ameo, open the hood to access the top of the headlights. Here you will find the mounting bolts that need to be loosened, disconnecting the connectors so that the headlight can be removed from its housing.

Once it is removed, you can extract the old bulb from inside its housing by removing the cover at the back. After inserting the new bulb, close the headlight and reconnect it by placing it back into its housing.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

Volkswagen Ameo (2016-2020 / MK 1) Here are the main instructions on how to remove and replace the front door panel of the Volkswagen Ameo. First, open the front door and start removin…
Volkswagen Ameo (2016-2020 / MK 1) To replace the battery in a Volkswagen Ameo, open the hood to access the components inside the engine compartment. On the right side, you will find t…
Volkswagen Ameo (2016-2020 / MK 1) This guide shows how to replace the fuel filter on a Volkswagen Ameo Mk1. The replacement procedure is very simple and quick and does not require spe…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos