Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Fob Battery on a Golf 7

Model: Volkswagen Golf Golf 7, Golf VII, MK 7 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

If the car key is not functioning as it used to when you want to use it, one of the main reasons is that the key battery is flat and needs replacing, a task that can be done easily. The battery is located in the rear section, and you need to remove that section.

First, open the key and use a screwdriver to remove the rear section. Underneath is the battery that needs replacing.

The new battery you need to install should be of the type "CR 2025". Using the same screwdriver, you can pry out the old battery. Take the new battery and position it as the first one was. Refit the removed section, applying moderate pressure.

After all these simple steps, the key should no longer have issues.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / Golf 7, Golf VII, MK 7) To replace the remote battery on a Volkswagen Golf 7, press the button located on the front of the remote to lift the key and free its housing. Once …
Volkswagen Golf (2008-2012 / MK 6, Golf 6, Golf VI, 5K1) Today, we will explain how to replace the battery in the key of a Volkswagen Golf model mk6. To replace the key battery, push the battery cover to re…
Volkswagen Golf (2019-2026 / Golf Viii, MK 8, Golf 8) In this very short video tutorial, we will see how to replace the battery (CR2032) in the key of an eighth-generation Volkswagen Golf. This is a very…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos