Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Alarm on a Volkswagen New Beetle

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012

In this tutorial video, we will see how to disable the alarm on a first-generation Volkswagen New Beetle by following the instructions below. First, get in the vehicle and insert the key into the ignition barrel, turning on the dashboard; you will see that the alarm will start sounding due to a possible system anomaly. At this point, turn off the ignition and lock the boot with the key, as shown in the video. Then, get back inside the car and turn on the ignition, checking that the alarm has been deactivated!

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the alarm of the Volkswagen New Beetle?
How do you deactivate the alarm of the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In order to deactivate the alarm of the Volkswagen New Beetle, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is loc…
How do you reset the service light on a 2016 Volkswagen New Beetle?
How do you reset the service light on a 2016 Volkswagen New Beetle?
Volkswagen New Beetle (2011-2018 / MK 3) Taking personal responsibility for the routine maintenance of one's car, in this specific case the 2016 Volkswagen New Beetle, is a very common choic…
Where are the fuses of the Volkswagen New Beetle located?
Where are the fuses of the Volkswagen New Beetle located?
Volkswagen New Beetle (1999-2012 / MK 2, 9C) The fuses of the Volkswagen New Beetle are contained within the dedicated fuse box installed in the car: this type of vehicle has a single box, with …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos