Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Volkswagen
  4. : Id 6

How to Install a Dash Cam on VW Id. 6

Model: Volkswagen Id 6 MK 1 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Accessory kit

Video tutorial

To connect a compatible dash cam for the Volkswagen Id. 6, first remove the plastic cover located above the rearview mirror using a plastic trim tool to unclip it. Once the cover is removed, pull out the plastic profile by sliding it toward the windshield and replace it with the one that has the integrated dash cam. Be careful, for the power connection use only connector "A", the one at the top. Reposition the profile by sliding it upward and reinsert the cover.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

Citroen C5 Aircross (2017-2022 / MK 1) To install the dash cam on the Citroën C5 Aircross, use a tool to pry off the trim panel behind the internal rear-view mirror: here you can install t…
MG 5 (2012-2018 / Ap12) Below is a description of how to mount a dashcam on your aftermarket vehicle: First, open the package and check the contents of the kit, which includ…
Toyota HiLux (2015-2024 / An120, An130, MK 8) Install a dash cam on the dashboard of the Toyota Hi-lux. This is a Lenovo dash cam. You can find it on Amazon for $59.49, complete with a 7" touchsc…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

What does the "Code 82" message indicate in the Chevrolet Orlando and how to remove it?

If the "Code 82" message appears on the dashboard of your Chevrolet Orlando, it means that the service interval in miles or time has been reached. Once all scheduled maintenance tasks are completed, you can remove the warning by following the simple procedure shown in this tutorial. First, insert the key and turn on the ignition, then press the "MENU" button located on the left control stalk and navigate to the screen displaying the "Reset" option. At this point, press the "SET/CLR" button at the end of the same stalk and confirm the reset.

Watch the video!


by ScegliAuto

More videos