Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of the Volkswagen Golf 5?

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Tail light

See other generations:
Video tutorial

To remove the rear light of the Volkswagen Golf 5, open the boot. This allows you to detach the carpet inside the boot where the light is located.

Under the carpet, you will find two screws that secure the light in its housing, one at the top and one at the bottom. Once these two screws are loosened, you can pull the light out of its housing and disconnect the connectors.

You can then connect the new light to the connector and secure it in place with the appropriate bolts.


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Headlamp of the Volkswagen Golf 6
How to Remove the Rear Headlamp of the Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) To remove the rear headlamp of the Volkswagen Golf 6, open the boot to access the components inside the luggage compartment. Detach the internal lini…
How to disassemble the rear headlight of the Volkswagen Golf
How to disassemble the rear headlight of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The steps to remove the rear light of the Volkswagen Golf model MK 7 are simple and quick to perform independently and do not require the use of any …
How to Replace the Rear Light Bulbs on a Volkswagen Golf
How to Replace the Rear Light Bulbs on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below, you will find instructions on how to remove and replace the rear light and its bulbs on a Volkswagen Golf. First, open the rear hatch and star…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos